Nikko Model 8085 DIN Receiver, as new

Nikko Model 8085 DIN Receiver, as new

Outstanding "Made in Japan" receiver, here in a special version for the german market with german labeling and DIN connectors. In almost like-new condition, an excellent powerhouse for everyday audiophile use.

Connections:

Number of inputs:
Phono: 2.5 mV, 50 kOhm
Microphone: 2.5 mV, 50 kOhm
Aux: 180 mV, 100 kOhm
Tape Play 1, 2: 180 mV, 100 kOhm
Main In: 1300 mV, 100 kOhm
FM antenna: 300 ohms / 75 ohms
AM antenna: 300 ohms
Number of outputs:
Tape Rec 1, 2: 170 mV
Tape Rec DIN: 30 mV
4-channel out: 170 mV
Pre Out: 1.3 V
Headphones: 200 ohms (6.3 mm jack, front)
2 pairs of speakers: (4-16 ohms)

Technical specifications:

Amplifier:

Continuous power (at Total Harmonic Distortion:
8 Ohms: 2x 45 W RMS
4 Ohms: 2x 60 W
Dynamic Power:
8 Ohms:
4 Ohms:
Total Harmonic Distortion: 0.3%
Damping Factor: > 40
Frequency Response: 20 Hz - 20 kHz
Signal-to-Noise Ratio:
Phono MM: 70 dB
Microphone: 75 dB
Line Level: 90 dB
Tone Control:
Bass: yes, ± 10 dB at 70 Hz
Treble: yes, ± 10 dB at 10 kHz
Loudness: yes, + 10 dB at 70 Hz, + 5 dB at 10 kHz
High Filter: -3 dB at 5 kHz (-6 dB / octave)
Low Filter (Subsonic): -3 dB at 100 Hz (-6 dB / octave)

Tuner:

Reception: FM, AM
Frequencies:
FM: 87 - 108 MHz
AM: 525 - 1,605 kHz
Frequency response: 30 - 15,000 Hz, ± 0.5 dB
FM: 1.8 µV
AM: 150 µV
Total harmonic distortion:
FM: 0.2% / 0.5% (mono/stereo)
Signal-to-noise ratio: 70 dB / 66 dB (mono/stereo)
Channel separation:
FM: > 40 dB
Selectivity:
FM: > 70 dB
AM: 30 dB
Common mode rejection:
FM: 1.8 dB
Spurious frequency rejection:
FM:
Image rejection:
FM: 80 dB
AM: 50 dB
IF attenuation:
FM: 90 dB
AM: 50 dB
AM rejection: 60 dB
Feedback geben
Übersetzungsergebnisse verfügbar